Projects funded by the NCN

Information on the principal investigator and host institution

Information of the project and the call

Keywords

Equipment

Delete all

Modeling of problems related to hydrodynamics of nanoprticles-filled active medium formation during machining in minimum quantity cooling and lubricating conditions.

2019/35/B/ST8/00552

Keywords:

surface topography nanoparticles minimum quantity cooling lubrication machining modelling

Descriptors:

  • ST8_007:
  • ST8_003:
  • ST8_004:

Panel:

ST8 - Production and processes engineering: modelling, product design, process design and control, construction methods and engineering, power units and systems

Host institution :

Uniwersytet Zielonogórski

woj. lubuskie

Other projects carried out by the institution 

Principal investigator (from the host institution):

dr hab. Radosław Wojciech Maruda 

Number of co-investigators in the project: 5

Call: OPUS 18 - announced on 2019-09-16

Amount awarded: 1 079 340 PLN

Project start date (Y-m-d): 2020-06-19

Project end date (Y-m-d): 2025-06-18

Project duration:: 60 months (the same as in the proposal)

Project status: Project completed

Project description

Download the project description in a pdf file

Note - project descriptions were prepared by the authors of the applications themselves and placed in the system in an unchanged form.

Information in the final report

  • Publication in academic press/journals (20)
  1. Influence of Al2O3 nanoparticle mass concentration and aerosol formation parameters on tool vibration during turning of Ti6Al4V titanium alloy
    Authors:
    Weronika Dylewicz , Natalia Szczotkarz , Radosław Maruda , M. K. Gupta
    Academic press:
    International Journal of Applied Mechanics and Engineering (rok: 2024, tom: 29, strony: 52-66), Wydawca: University of Zielona Gora
    Status:
    Published
    DOI:
    10.59441/ijame/189470 - link to the publication
  2. Metrological analysis of surface quality aspects in minimum quantity cooling lubrication
    Authors:
    R.W. Maruda, S. Wojciechowski, N. Szczotkarz, S. Legutko, M. Mia, M.K. Gupta, P. Nieslony, G.M. Krolczyk
    Academic press:
    Measurement (rok: 2021, tom: 171, strony: 45669), Wydawca: Elsevier
    Status:
    Published
    DOI:
    10.1016/j.measurement.2020.108847 - link to the publication
  3. Cutting tool wear in turning 316L stainless steel in the conditions of minimized lubrication
    Authors:
    Natalia Szczotkarz, Roland Mrugalski, Radosław W. Maruda, Grzegorz M. Królczyk, Stanisław Legutko, Kamil Leksycki, Daniel Dębowski, Catalin I. Pruncu
    Academic press:
    Tribology International (rok: 2021, tom: 156, strony: 45670), Wydawca: Elsevier
    Status:
    Published
    DOI:
    10.1016/j.triboint.2020.106813 - link to the publication
  4. Cutting tool wear in turning 316L stainless steel in the conditions of minimized lubrication
    Authors:
    Natalia Szczotkarz, Roland Mrugalski, Radosław W. Maruda, Grzegorz M. Królczyk, Stanisław Legutko, Kamil Leksycki, Daniel Dębowski, Catalin I. Pruncu
    Academic press:
    Tribology International (rok: 2021, tom: 156, strony: 45670), Wydawca: Elsevier
    Status:
    Published
    DOI:
    10.1016/j.triboint.2020.106813 - link to the publication
  5. Cutting tool wear in turning 316L stainless steel in the conditions of minimized lubrication
    Authors:
    Natalia Szczotkarz, Roland Mrugalski, Radosław W. Maruda, Grzegorz M. Królczyk, Stanisław Legutko, Kamil Leksycki, Daniel Dębowski, Catalin I. Pruncu
    Academic press:
    Tribology International (rok: 2021, tom: 156, strony: 45670), Wydawca: Elsevier
    Status:
    Published
    DOI:
    10.1016/j.triboint.2020.106813 - link to the publication
  6. Evaluation of tool wear during turning of Ti6Al4V alloy applying MQL technique with Cu nanoparticles diversified in terms of size
    Authors:
    Radosław W. Maruda, Natalia Szczotkarz, Mariusz Michalski, Katarzyna Arkusz, Szymon Wojciechowski, Piotr Niesłony, Navneet Khanna, Grzegorz M. Krolczyk
    Academic press:
    Wear (rok: 2023, tom: 532-533, strony: 205111), Wydawca: Elsevier
    Status:
    Published
    DOI:
    10.1016/j.wear.2023.205111 - link to the publication
  7. Analysis of Power Grid Parameters Depending on the Variable Concentration and Size of Copper Nanoparticles and Aerosol Formation Parameters in the Minimum Quantity Lubrication Method during Turning of Ti6Al4V Titanium Allo
    Authors:
    Radosław W. Maruda, Natalia Szczotkarz, Kamil Leksycki, Eugene Feldshtein, Szymon Wojciechowski, Paweł Jurczak, Michał Waligóra
    Academic press:
    Advances in Science and Technology Research Journal (rok: 2023, tom: 17, strony: 315-324), Wydawca: ISSN 2299-8624
    Status:
    Published
    DOI:
    10.12913/22998624/174806 - link to the publication
  8. Metrological analysis of surface quality aspects in minimum quantity cooling lubrication
    Authors:
    R.W. Maruda, S. Wojciechowski, N. Szczotkarz, S. Legutko, M. Mia, M.K. Gupta, P. Nieslony, G.M. Krolczyk
    Academic press:
    Measurement (rok: 2021, tom: 171, strony: 45669), Wydawca: Elsevier
    Status:
    Published
    DOI:
    10.1016/j.measurement.2020.108847 - link to the publication
  9. In uence of Aluminium Oxide Nanoparticles Mass Concentrations on the Tool Wear Values During Turning of Titanium Alloy under Minimum Quantity Lubrication Conditions
    Authors:
    Natalia Szczotkarz, Krzysztof Adamczuk, Daniel Dębowski, Munish Kumar Gupta
    Academic press:
    Advances in Science and Technology Research Journal (rok: 2024, tom: 18, strony: 76-88), Wydawca: ISSN 2299-8624
    Status:
    Published
    DOI:
    10.12913/22998624/175917 - link to the publication
  10. Metrological analysis of surface quality aspects in minimum quantity cooling lubrication
    Authors:
    R.W. Maruda, S. Wojciechowski, N. Szczotkarz, S. Legutko, M. Mia, M.K. Gupta, P. Nieslony, G.M. Krolczyk
    Academic press:
    Measurement (rok: 2021, tom: 171, strony: 45669), Wydawca: Elsevier
    Status:
    Published
    DOI:
    10.1016/j.measurement.2020.108847 - link to the publication
  11. Analysis of size and concentration of nanoparticles contained in cutting fluid during turning of 316L steel in minimum quantity lubrication conditions
    Authors:
    Radosław W. Maruda, Katarzyna Arkusz, Natalia Szczotkarz, Szymon Wojciechowski, Piotr Niesłony, Grzegorz M. Królczyk
    Academic press:
    Journal of Manufacturing Processes (rok: 2023, tom: 87, strony: 106-122), Wydawca: Elsevier Ltd.
    Status:
    Published
    DOI:
    10.1016/j.jmapro.2022.12.065 - link to the publication
  12. Analysis of Power Grid Parameters Depending on the Variable Concentration and Size of Copper Nanoparticles and Aerosol Formation Parameters in the Minimum Quantity Lubrication Method during Turning of Ti6Al4V Titanium Allo
    Authors:
    Radosław W. Maruda, Natalia Szczotkarz, Kamil Leksycki, Eugene Feldshtein, Szymon Wojciechowski, Paweł Jurczak, Michał Waligóra
    Academic press:
    Advances in Science and Technology Research Journal (rok: 2023, tom: 17, strony: 315-324), Wydawca: ISSN 2299-8624
    Status:
    Published
    DOI:
    10.12913/22998624/174806 - link to the publication
  13. Cutting tool wear in turning 316L stainless steel in the conditions of minimized lubrication
    Authors:
    Natalia Szczotkarz, Roland Mrugalski, Radosław W. Maruda, Grzegorz M. Królczyk, Stanisław Legutko, Kamil Leksycki, Daniel Dębowski, Catalin I. Pruncu
    Academic press:
    Tribology International (rok: 2021, tom: 156, strony: 45670), Wydawca: Elsevier
    Status:
    Published
    DOI:
    10.1016/j.triboint.2020.106813 - link to the publication
  14. Metrological relations between the spray atomization parameters of a cutting fluid and formation of a surface topography and cutting force
    Authors:
    Radosław W. Maruda, Natalia Szczotkarz, Szymon Wojciechowski, Jozef Gawlik, Grzegorz M. Krolczyk
    Academic press:
    Measurement (rok: 2023, tom: 219, strony: 113255), Wydawca: Elsevier
    Status:
    Published
    DOI:
    10.1016/j.measurement.2023.113255 - link to the publication
  15. In uence of Aluminium Oxide Nanoparticles Mass Concentrations on the Tool Wear Values During Turning of Titanium Alloy under Minimum Quantity Lubrication Conditions
    Authors:
    Natalia Szczotkarz, Krzysztof Adamczuk, Daniel Dębowski, Munish Kumar Gupta
    Academic press:
    Advances in Science and Technology Research Journal (rok: 2024, tom: 18, strony: 76-88), Wydawca: ISSN 2299-8624
    Status:
    Published
    DOI:
    10.12913/22998624/175917 - link to the publication
  16. Metrological relations between the spray atomization parameters of a cutting fluid and formation of a surface topography and cutting force
    Authors:
    Radosław W. Maruda, Natalia Szczotkarz, Szymon Wojciechowski, Jozef Gawlik, Grzegorz M. Krolczyk
    Academic press:
    Measurement (rok: 2023, tom: 219, strony: 113255), Wydawca: Elsevier
    Status:
    Published
    DOI:
    10.1016/j.measurement.2023.113255 - link to the publication
  17. Evaluation of tool wear during turning of Ti6Al4V alloy applying MQL technique with Cu nanoparticles diversified in terms of size
    Authors:
    Radosław W. Maruda, Natalia Szczotkarz, Mariusz Michalski, Katarzyna Arkusz, Szymon Wojciechowski, Piotr Niesłony, Navneet Khanna, Grzegorz M. Krolczyk
    Academic press:
    Wear (rok: 2023, tom: 532-533, strony: 205111), Wydawca: Elsevier
    Status:
    Published
    DOI:
    10.1016/j.wear.2023.205111 - link to the publication
  18. Analysis of size and concentration of nanoparticles contained in cutting fluid during turning of 316L steel in minimum quantity lubrication conditions
    Authors:
    Radosław W. Maruda, Katarzyna Arkusz, Natalia Szczotkarz, Szymon Wojciechowski, Piotr Niesłony, Grzegorz M. Królczyk
    Academic press:
    Journal of Manufacturing Processes (rok: 2023, tom: 87, strony: 106-122), Wydawca: Elsevier Ltd.
    Status:
    Published
    DOI:
    10.1016/j.jmapro.2022.12.065 - link to the publication
  19. Analysis of size and concentration of nanoparticles contained in cutting fluid during turning of 316L steel in minimum quantity lubrication conditions
    Authors:
    Radosław W. Maruda, Katarzyna Arkusz, Natalia Szczotkarz, Szymon Wojciechowski, Piotr Niesłony, Grzegorz M. Królczyk
    Academic press:
    Journal of Manufacturing Processes (rok: 2023, tom: 87, strony: 106-122), Wydawca: Elsevier Ltd.
    Status:
    Published
    DOI:
    10.1016/j.jmapro.2022.12.065 - link to the publication
  20. Metrological analysis of surface quality aspects in minimum quantity cooling lubrication
    Authors:
    R.W. Maruda, S. Wojciechowski, N. Szczotkarz, S. Legutko, M. Mia, M.K. Gupta, P. Nieslony, G.M. Krolczyk
    Academic press:
    Measurement (rok: 2021, tom: 171, strony: 45669), Wydawca: Elsevier
    Status:
    Published
    DOI:
    10.1016/j.measurement.2020.108847 - link to the publication

O Narodowym Centrum Nauki

Finansowanie nauki

Współpraca zagraniczna

Centrum prasowe

Deklaracja dostępności
Przetwarzanie danych osobowych
Polityka cookies

Partnerzy