Projects funded by the NCN

Information on the principal investigator and host institution

Information of the project and the call

Keywords

Equipment

Delete all

Microstructural and kinetic characterization of the phenomena occurring at the solder/substrate interfaces of the Ti-6Al-4V alloys brazed with the use amorphous TiZrCuPd ribbons.

2013/11/B/ST8/04286

Keywords:

microstructure phase transitions the kinetics of phase transormations amorphous brazing Ti-based alloys

Descriptors:

  • ST8_8: Mechanics of solids

Panel:

ST8 - Production and processes engineering: modelling, product design, process design and control, construction methods and engineering, power units and systems

Host institution :

Instytut Metalurgii i Inżynierii Materiałowej im. Aleksandra Krupkowskiego PAN

woj. małopolskie

Other projects carried out by the institution 

Principal investigator (from the host institution):

dr Anna Sypień 

Number of co-investigators in the project: 5

Call: OPUS 6 - announced on 2013-09-16

Amount awarded: 686 070 PLN

Project start date (Y-m-d): 2014-07-15

Project end date (Y-m-d): 2017-12-14

Project duration:: 41 months (the same as in the proposal)

Project status: Project settled

Equipment purchased [PL]

  1. Układ próżniowy do lutowania w atmosferze ochronnej (145 000 PLN)
  2. Nagrzewnica indukcyjna (10-30 kHz, 40kW) (55 000 PLN)
  3. Regulator temperatury.

Information in the final report

  • Publication in academic press/journals (3)
  • Articles in post-conference publications (14)
  • Book publications / chapters in book publications (1)
  1. Effect of Pd, temperature and time on wetting and interfacial microstructure of bulk metallic glasses TiCuZrPd on Ti-6Al-4V substrate.
    Authors:
    Anna Sypien, Kamil Badura, Przemyslaw Fima, Krzysztof Miernik
    Academic press:
    Journal of Alloys and Compounds (rok: 2017, tom: 695, strony: 962-970), Wydawca: Elsevier
    Status:
    Published
    DOI:
    10.216 - link to the publication
  2. Thermomechanical behavior of amorphous alloys based on titanium at the temperature range of the glass transition and crystallization
    Authors:
    A. Sypien, G. Garzel, T. Czeppe
    Academic press:
    Materials Science & Engineering A (rok: 2019, tom: 743, strony: 77-86), Wydawca: Elsevier
    Status:
    Published
    DOI:
    10.1016/j.msea.2018.11.071 - link to the publication
  3. Modification of the Ti40Cu36Zr10Pd14 BMG Crystallization Mechanism with Heating Rates 10-140 K/min
    Authors:
    T. Czeppe, A. Sypien, and A. Wierzbicka-Miernik
    Academic press:
    Journal of Materials Engineering and Performance (rok: 2016, tom: 25, strony: 5289-5301), Wydawca: Springer
    Status:
    Published
    DOI:
    10.1007/s11665-016-2368-x - link to the publication
  1. Microstructure characteristics of joints after induction brazing of Ti-6Al-4V alloy with Ti-Zr-Cu-Pd-Sn amorphous filler foil.
    Authors:
    K. Badura, A. Sypien
    Conference:
    EUROMAT2017 - European Congress and Exhibition on Advanced Materials and Processes (rok: 2017, ), Wydawca: Hellenic Metallurgical Society (HMS) and Hellenic Society for the Science & Technology of Condensed Matter (HSSTCM)
    Data:
    konferencja 17-22.09.2017
    Status:
    Published
  2. Microstructure, Phase Composition and Shear Strength of the TiAlV/TiCuZrPd/TiAlV Brazed Joints
    Authors:
    Anna Sypien1; Joanna Wojewoda-Budka1; Lidia Litynska-Dobrzynska1; Kamil Badura1
    Conference:
    TMS16 -145th annual meeting & Exhibition (rok: 2016, ), Wydawca: WILEY
    Data:
    konferencja 14-18.02.2016
    Status:
    Published
  3. Evaluation of microstructure and strength of induction brazed joints of TiAlV with Ti-based filler alloy
    Authors:
    A. Sypien
    Conference:
    13th International Conference on Diffusion in Solids and Liquids - DLS2017 (rok: 2017, ), Wydawca: DSL CONFERENCE
    Data:
    konferencja 26-30.06.2017
    Status:
    Published
  4. Crystallization of the Ti40Cu36Zr10Pd14 BMG studied with the high-rate DSC calorimetry
    Authors:
    T. Czeppe, A. Sypien, M. Stoica, A. Wierzbicka-Miernik and M. Szlezynger
    Conference:
    ISMANAM 2015 22-th International Symposium on Metastable Amorhous and Nanostructured Materials (rok: 2015, ), Wydawca: ISMANAM2015
    Data:
    konferencja 13-17.07
    Status:
    Published
  5. Induction brazed Ti-6Al-4V alloy: Microstructure changes and phase transformation during annealing
    Authors:
    A.Sypien, Ł.Major, K. Badura and R. Chulist
    Conference:
    XVI International Conference ob Electron Microscopy EM2017 (rok: 2017, ), Wydawca: PTMI (Polish Society of Microscopy) and Faculty of materials Science and Engineering (Politechnika Warszawska)
    Data:
    konferencja 10-13.09.2017
    Status:
    Published
  6. Effect of aging temperature on the intermetallic phase stability after induction brazed of Ti-6Al-4V alloy with amorphous TiCuZrPd filler
    Authors:
    Anna Sypien, A.Wierzbicka-Miernik, K. Badura
    Conference:
    24th International Symposium on Metastable, Amorphous and Nanostructured Materials (rok: 2017, ), Wydawca: Arcady Zhukov
    Data:
    konferencja 18-23.06
    Status:
    Accepted for publication
  7. Brazing of Ti-6Al-4V alloy with new amorphous Ti-Zr-Cu-Pd-Sn filler foil
    Authors:
    Kamil badura, Anna Sypień
    Conference:
    13th Junior Euromat 2016 (rok: 2016, ), Wydawca: FEMS Federation of Europen Materials Societies
    Data:
    konferencja 10-14.07.2016
    Status:
    Published
    DOI:
    link to the publication
  8. Effect of Sn addition on the wettability of amorphous TiZrCuPdSn alloys on Ti-6Al-4V substrate
    Authors:
    K. Badura, A. Sypien, P. Fima
    Conference:
    AMT 2016 - XXI Physical Metallurgy and Materials Science Conference (rok: 2016, ), Wydawca: BEL Studio Sp. z o.o.
    Data:
    konferencja 5-8.2016
    Status:
    Published
  9. Influence of Pd addition on the wettability of amorphous TiCuZrPd alloys used as a filler during the brazing process.
    Authors:
    A.Sypien, P.Fima
    Conference:
    TMS2015 - 144 Annual Meeting and Exibiton 2015 (rok: 2015, ), Wydawca: WILEY
    Data:
    konferencja 15-19.03
    Status:
    Published
  10. Effect of brazing process parameters and the content of Pd on the growth of intermetallic phases in the joint TiAlV / TiCuZrPd / TiAlV
    Authors:
    A. Sypien, K. Badura, B. Kania
    Conference:
    EUROMAT2017 - European Congress and Exhibition on Advanced Materials and Processes (rok: 2017, ), Wydawca: Hellenic Metallurgical Society (HMS) and Hellenic Society for the Science & Technology of Condensed Matter (HSSTCM)
    Data:
    konferencja 17-22.09.2017
    Status:
    Published
  11. High-Temperature Oxidation Behavior of the TiCuZrPd Joint Produced by Vacuum Brazing
    Authors:
    Tomasz Czeppe, A. Sypien, Kamil Badura
    Conference:
    24th International Symposium on Metastable, Amorphous and Nanostructured Materials (rok: 2017, ), Wydawca: Arcady Zhukov
    Data:
    konferencja 18-23.06
    Status:
    Published
  12. Induction heating technique applied for titanium brazing
    Authors:
    K. Badura, A. Sypien, W. Przybylo
    Conference:
    11th International Workshop on Subsecond Thermophysics (rok: 2016, ), Wydawca: Foundary Research Institute
    Data:
    konferencja 21-24.07.2016
    Status:
    Published
  13. Thermomechanical and structural characterization of TiAlV/TiCuZrPd/TiAlV interconnections
    Authors:
    Anna Sypien, Tomasz Czeppe, Grzegorz Garzel
    Conference:
    AMT 2016 - XXI Physical Metallurgy and Materials Science Conference (rok: 2016, ), Wydawca: BEL Studio Sp. z o.o.
    Data:
    konferencja 5-8.06.2016
    Status:
    Published
  14. Wettability and interfacial microstructure characteristics of amorphous Zr52Ti24X14Cu10 (X=Ni, Pd) alloys on Ti-6Al-4V substrate
    Authors:
    K. Badura, A. Sypien, P. Fima
    Conference:
    XVI International Conference on Electron Microscopy, EM2017 (rok: 2017, ), Wydawca: PTMI (Polish Society of Microscopy) and Faculty of materials Science and Engineering (Politechnika Warszawska)
    Data:
    konferencja 1--13.09.2017
    Status:
    Published
    DOI:
    link to the publication
  1. Amorficzne stopy na osnowie tytanu jako perspektywiczny materiał lutowniczy
    Authors:
    Anna Sypień
    Book:
    Amorficzne stopy na osnowie tytanu jako perspektywiczny materiał lutowniczy (rok: 2019, tom: 1, strony: 1-188), Wydawca: Instytut Metalurgii i Inżynierii materiałowej PAN
    Status:
    Published

O Narodowym Centrum Nauki

Finansowanie nauki

Współpraca zagraniczna

Centrum prasowe

Deklaracja dostępności
Przetwarzanie danych osobowych
Polityka cookies

Partnerzy